Advertisement
how to wire landscape lighting Installing, Strip Lights With Your, Voltage Landscape Light System, YouTube 13 Most How To Wire Landscape Lighting Solutions

13 Most How To Wire Landscape Lighting Solutions

Related photos in this diagram:

Other recommended diagram ideas:

Installing, Strip Lights With Your, Voltage Landscape Light System, YouTube - Despite the fact that most lighting need to be assembled, it is easy to position them collectively. Begin with the aid of going for walks the wires from the mild assembly via the riser base and fix the stake. Insert the mild bulb, then attach the lens and cover.

After you installation the transformer, plan the layout. Depending at the fashion of the mild, you can collect it and press it into the floor or drive the base into the ground and screw the mild onto the bottom. A few lighting have adjustable sunglasses that assist you direct the light onto precise areas. Connect the mild via clamping the wires to the electricity cable. Turn on the power to check the electrical connections, and make the very last modifications at night.

As soon as the lighting fixtures are assembled, and you're satisfied with the location, dig a shallow trench for the cable (or the cable can be left above ground, if favored). Run the cable alongside the trench, and fasten the lighting to the cable. The lighting have clamps with metallic enamel that pierce the cable insulation and faucet without delay into the power line.

Decide how many lighting fixtures you'll want and wherein they should be set up. Then perceive the power source, which must be an outside gfci outlet, and decide what different electrical devices are powered with the aid of it. Do no longer overload the circuit. Mount the transformer on the wall near the strength source. The transformer should be at the least 1' above ground stage. (Image 1).

Once you set up the transformer, plan the layout. Relying at the fashion of the light, you could gather it and press it into the floor or force the bottom into the ground and screw the mild onto the base. A few lights have adjustable sunglasses that help you direct the light onto specific regions. Join the light by way of clamping the wires to the strength cable. Activate the energy to test the electrical connections, and make the final adjustments at night time.

Connect the power cable to the transformer, and mount the transformer. Plug it in, and set the timer to the "on" role to test the lights. If all the lights are working, set the timer for the hours you want the lights to turn on and stale. Then pass around the lighting and bury the cable.