wiring a light fixture with 3 sets of wires Trying to replace simple light fixture, find four sets of Romex wires, in, box. Very confused 13 New Wiring A Light Fixture With 3 Sets Of Wires Solutions

13 New Wiring A Light Fixture With 3 Sets Of Wires Solutions

Related photos in this diagram:

Other recommended diagram ideas:

13 New Wiring A Light Fixture With 3 Sets Of Wires Solutions - With switches off, you may trial each pair of wires by hooking it (black-black and white-white) to the recognized strength deliver. Experience unfastened to use the receptacle as a splice block. If it lights up, then you definately understand what that is.

1 and three are the equal thing. 2 and 4 are the identical aspect. And they serve a brand new purpose: honestly a convenient splicing technique. Simply bear in mind, there are 3 things here: the supply cable, the downstream cable, and the receptacle itself.

The light switch seems to be fed from the receptacle underneath it. (Cable c) so, the white cord on the switch ought to be re-recognized as a hot twine with black, purple or blue tape. It's far now the hot feed to the transfer. If this cord comes from the receptacle below it ought to additionally be re-identified there. The black twine in that equal cable is the go back leg from the transfer. Your lighting (cable b) need to be fed with the switch leg wire now not the hot wire from the panel, and the impartial from cable a.

Thank you replies paul. 1) a dimmer transfer is handiest used to govern lights and in no way a wall receptacle. You point out the following......."The dimmer transfer is , it's also led bulbs". What number of wall places can the transfer flip the light fixture on & off? 2) so the wall switch field includes 3 whites, three blacks and 3 bare copper grounds? Need confirmation as to the precise cord matter and cord colors inside the wall transfer field?.

Your transfer has only one cable. That could be a transfer loop, and it has wires: hot and switched-hot. They are black and white because it is how cables are made. I might have used tape to make them black and red.

I just bought a residence built in 1977. I am updating outlets and switches inside the residence and ran throughout a fun venture closing night. My father-in-law completed one room and when we grew to become the breaker returned on the lights in the room wouldn’t flip off. I accept as true with the issue is within the outlet box below the switch. It has three sets of black and white wires. I discovered the set from the box and placed those within the pinnacle two positions (1 and a couple of) on the outlet (black/brass, white/silver) and i've energy to that outlet only. When i hook up set b to the lowest two positions (three and four), everything activates (switches and plugs) and the light transfer received’t flip off the lighting. Set c appears to have no have an effect on on whatever. I linked the switch and continuing circuit wires to posts 3 & 4 and unfolded the 2d outlet inside the series. It additionally had three sets of wires?! Once i stressed it up as proven, the entirety works the manner it is supposed to. But the black switch wire can’t touch anything if i clean up outlet 2 and cap the loose black cord is the whole lot okay? Any thoughts?.