wiring a light switch red and black ... installed ceiling, now light switch, working properly home wiring prior enter description here wall 10 Top Wiring A Light Switch, And Black Pictures

10 Top Wiring A Light Switch, And Black Pictures

Related photos in this diagram:

Other recommended diagram ideas:

10 Top Wiring A Light Switch, And Black Pictures - You have got a 2-way transfer. One of the black wires is probably the road and the opposite carries strength to a few different tool on the circuit; they're connected together via one using the backstab connector and the other the screw. The pink wire is probably the burden (it is also viable the crimson is the road and you've got hundreds controlled by means of the transfer).

I've been progressively changing switches in my residence with zwave ones. The other day i opened this man up and observed a pink twine wired to the pinnacle of the transfer, a black twine at the bottom and every other black wire wrapped round the bottom screw. I am pretty positive this isn't a three manner switch however it is sitting in a room with a ceiling fan and the fan does now not have a switch of its personal. Just a far flung. So i think this purple wire has some thing to do with the fan.

1st, the white wires need to be completely protected with black tape. Strive placing both identical shades on the top and at the lowest, when you have proven all these wires are the tourists from 2, 3-way switches.

I've the equal element, however i have a white neutral and copper floor -- no hassle there. ?i simply do not know a way to cope with connecting three wires ( black one red) from the field to two wires on the new transfer. ?.

Now of route i could simply cord the wave switch the identical manner with the addition of a neutral wire (the ge wave transfer calls for it) however i would want to higher understand what is happening here. I'm pretty new at switches so does absolutely everyone have any idea what's taking place here?.

Quote" i got the wemo light switch set up with the aid of connecting the crimson twine to one of the wemo black wires, connecting what appears to be the commonplace black twine to the wemo and simply capping the leftover black wire that was within the field". It's towards code so i don't suggest it however the wemo can even work if you join it is white to floor. ?to do this you'd must use the black as the line, purple as return, and also you'd want to hold the other switch on all the time. ?this will be a in addition  code/protection violation if a three way switch was required (as is maximum probably the case).